Pre Wired LED Micro Wire Water Resistant Multi Color Flash 0805 3528 RGB US Ship

Description

*Buyers please note:
The US postal service is going through a very rough time right now due to Covid and other factors. Lost items and variable delivery times are now common due to these issues. We are here to provide the BEST service for you. Please contact us via messaging before opening a case or designating an item as not received. If your order is significantly delayed – your issue WILL be resolved. Trust US sellers and their commitment to you! Thank you for your understanding.
20cm (8″) Pre-Wired LED
You
will not find a similar item to this on eBay. There are many potential
applications for this LED. Wearable electronics, crafts, model making, custom wiring, etc. In the darkened images the LED is drawing 20mA of current.
This item is of
limited availability.
0805 LED:
This is the most popular LED for hobbies and custom wiring. The 0805 is very tiny and can be routed/placed where other LED’s cannot. The LED is bright and a very high value resistor can be used to achieve the desired effect. The light source is pin-point with wide dispersion. Flashing LEDs: roughly 8 flashes every 5 seconds, equal time on/off.
3528 LED:
Another popular LED variation. This LED projects a spotlight or flashlight dispersion of around 120 deg. It can be placed in various angles/positions to illuminate a surface evenly with a consistent light level. This LED can also use a very high value resistor
to achieve the desired effect
. In the image the LED is 4″ away from a white surface and the brightest spot is 6″ with diffusion up to 4″.
5050
R
G
B
LED:
Each
LED is controlled individually and can be easily interfaced to another
device to vary the brightness levels (current) to produce various
colors. The leads are color coded. In the image the LED is 6″ away from a white
surface and the brightest spot is around 12″ with diffusion up to 12″. This LED can function with currents around 30mA. It can also tolerate currents up to 60mA. *This is not recommended however as the brightness level is not much affected and the LED could be damaged over time.
Quantity:
1 piece
Features:
LED sizes:
0805 (2
x
1.5
x
.7mm)
3528 (3.5
x
2.8
x
1.25mm)
5050 (5
x
5
x
1.25mm)
LED’s chosen for optimal brightness.
Leads are small, flexible and durable.
Twisted 30AWG enameled wire –
8″ wire length + 1″ lead length.
Ends tinned and anode marked.
Carefully hand soldered. (tested for shorts and diode integrity)
The back of the LED is enamel/epoxy coated for insulation and durability.
LED is functional with over 5M Ohm resistance across anode/cathode under water.
*Water-resistant
The LED’s have been tested to draw up to 30mA.
*Please note this is a hand made item and there may be structural variations which do not affect functionality.
Note:
The LED is supplied without a resistor due to the varying voltages the particular application will supply. A resistor
must
be used to limit current no matter the application. If a resistor is
not
used the LED can be permanently damaged. In addition.. a
minimum
power source of 3 Volts is recommended for reliable and long term functionality of the LED.
**In order to figure the proper current for the LED you need three values: the Voltage source, the LED voltage drop, and the resistor value. The LED voltage drop for the red, green, orange, yellow, and pink LEDs is around 2 Volts. The blue, white, and UV LEDs are around 3.2V. To calculate the resistor needed for your application use this formula: Voltage source minus Voltage drop divided by the resistor value. For example: if you have a 5V source and a blue LED, and want the max output (close) from the LED (20mA) use this formula: 5-3.2/100 Ohm = 0.018 (18mA). Please see my other auctions for resistors which are available inexpensively.
Shipping:
I
pack and ship your items quickly! You are purchasing from a US seller
who ships from the USA. If your order is placed M-F before 2 PM CST I
ship the same day. Orders placed over the weekend go out Monday. Your
order is always assured to arrive quickly and in good condition. Most
single piece items are delivered via USPS First Class Mail, and
generally take 3-4 days to arrive. Buyers from states like FL and WA
might experience slightly longer shipping times. Please be sure your
confirmed PayPal address is current to avoid shipping delays.
Customer Satisfaction:
I
greatly appreciate my customers and do my best to provide a quality
product. If for any reason you have an issue or question regarding an
item, please contact me before opening a case or leaving negative
feedback. Your positive feedback and continued business is important to
me!